LK-T80 Aluminum Foil Container Machine with Custom Logo Embossing

If you are producing coated aluminum foil containers, you already know: coated materials behave differently. They require precise control, stable pressure, and gentle handling to avoid scratching or damaging the coating layer. The LK-T80 is built specifically with these requirements in mind.

Why Coated Material Needs a Different Machine
Coated aluminum foil (often used for non-stick or colored containers) has a surface layer that can be easily scratched or marred during feeding and stamping. The LK-T80 addresses this with its extremely stable "H" frame and solid worktable design. 

Production That Works With Your Coating Supplier
We work with all standard coated material grades including 3003H24, 8011 H22, and 3004 H24. Material thickness range is 0.025-0.2mm, covering most coated container applications. The enclosed lubrication system means no oil mist or droplets contaminate your coated material during production—a common problem with open-lubrication machines that can ruin coated surfaces.

Color Customization Without Complexity
If you are producing colored coated containers, you probably switch colors frequently. The LK-T80 supports quick color changes through two features: the fast mold change system (15 minutes, one person) and the ability to add printing or embossing units. Need to match a specific brand color? Use your coated material supplier's color range—the machine handles it perfectly.

Branding on Coated Surfaces
The detachable logo block works beautifully on coated materials. Since coated surfaces are often smoother than bare aluminum, the embossing comes out crisp and clean. You can maintain your brand presence even on specialty coated products.

Built for Real Factory Conditions
The LK-T80 runs 24/7 if needed. One operator manages the entire line. Safety doors protect your team. Automatic fault display on the touchscreen means problems are identified immediately. Core components from Mitsubishi, Siemens, ABB, and Schneider Electric ensure reliability. And with clients in over 30 countries, we understand the support needed to keep your line running.

If coated material is your business, the LK-T80 is your machine.

• H-frame 80Ton structure – stronger stability, longer service life, less vibration
• 4–6 cavities design – higher output than standard 3-cavity machines
• Enclosed lubrication system – cleaner, oil-saving, lower long-term cost
• Safety door with auto-stop – protects operators, meets factory safety standards
• Mold lifter arm & quick mold change – one operator, 15 minutes to change mold
• Custom logo embossing – adds brand value to aluminum foil containers
• Automatic counting & fault alarm – easy monitoring, less downtime
• 24-hour continuous working – stable for mass production
• International brand parts – reliable, low failure rate

Applications:

It accepts orders of 1 unit minimum, priced $45,000-$75,000. Packed in strong wooden crates and iron casings, it’s shipped safely worldwide without damage.

Off-the-shelf models arrive in 30 days, customized ones as agreed. Flexible payment (T/T, L/C) and 50 units/year production capacity for quick order handling enhance its dependability.

FAQ:

Q: Can I produce colored coated containers with this machine?
A: Yes. Use pre-coated colored aluminum foil from your supplier, and the LK-T80 will handle it. The machine's stability ensures even pressure distribution, so colored coatings apply consistently without streaking or peeling.

Q: Will the lubrication system contaminate my coated material?
A: No. The LK-T80 uses a fully enclosed lubrication system. Unlike open systems that spray oil mist, our enclosed design keeps oil away from your material—critical for maintaining clean coated surfaces.

Q: How do I switch between different coated material colors?
A: Quickly. Change molds in about 15 minutes using the hydraulic pump and mold lifter arm. The machine stores parameters for up to 60 molds, so when you switch colors, you just recall the saved settings and start production.

Q: Can I emboss my logo on coated containers without damaging the coating?
A: Absolutely. The detachable logo block is designed for clean embossing on smooth coated surfaces. Since the machine applies even, stable pressure, the logo comes out crisp without cracking or damaging the coating layer.

Q: What coated material grades and thicknesses work with this machine?
A: The LK-T80 handles 3003H24, 8011 H22, and 3004 H24 grades. Thickness range is 0.025-0.2mm. Note: for material under 50 micron, we do not recommend using 3004.

Q: I'm worried about coating scratching during feeding. How does the machine prevent this?
A: The feeder is designed for smooth material transition into the stamping area. Combined with the machine's rigid frame and controlled speed (35-68 strokes/min), the material moves consistently without jerking or scraping that could damage coatings.

Q: Can I add printing or patterns to my coated containers?
A: Yes. You can add an embossing unit for textured patterns or a printing device for additional designs. These integrate with the feeder and work alongside your coated material production.

Q: What if I have quality issues with my coated containers?
A: Send us photos of the defective containers showing the problem clearly. Our team can usually diagnose coating issues (scratching, peeling, uneven pressure) from images and advise on adjustments.

Q: Do you provide molds for coated containers?
A: Yes. We design and manufacture molds specifically for coated materials, considering the unique properties of coated foil. Send us your sample, and we'll create the mold.